Payment & Shipping Terms:
|Product Name:||Aluminum Profile||Alloy:||6063,6061|
|Suface Treatment:||Fluorocarbon Powder Spray Coated /PVDF Paint, Drawbench,Steel Polished||Material:||Aluminum|
|Deep Process:||Milling, Drilling, Bending,Cutting||Temper:||T6|
structural aluminum extrusions,
aluminium structural sections
We have a good design team, we can open mould for your special requirements.
|3||Product series:||Aluminium profile for building material and industrial materail|
|4||Price:||Based on SMM Aluminium Ingot price(www.smm.cn) + processing Fee|
|5||Payment term:||T/T, L/C at sight|
|6||Surface treatment:||Anodizing, Powder coating, electrophoresis, wooden finish|
|7||Specification:||A. Alloy: 6063, 6060, 6061, 6005|
|B. State: T5/T6|
|C. Length: 1m-7m|
|D. Normal Anodizing thickness: 8-12 micro|
|E. Normal powder coating thickness: 60-100 micro|
|F. Tensile strength: ≥ 16 mpa|
|G. Yield strength: ≥ 110 mpa|
|H. Extensibility: ≥ 8%|
|I. Hardness(HW): ≥ 8|
|8||Packing:||Kraft paper, EPE Fram, Shrink film, Composite paper|
|10||Delivery time:||15-30 days if the mould is ready|
|11||Normal order sequence:||1. Confirm the drawings, colors and price;
2. Pay the mould fee and we strat to make moulds;
3. We send samples to you for your confirmation;
4. Make the payment of 30% deposit, start production;
Aluminum profile used in cars, trains machinery ,electronics, medical and other industrial filed . In terms of hardware, machinery, electromechanical parts, solar PV products, aluminum frames are adopt as important auxiliary materials. We also have aluminum profiles for radiators, fitness machinery, buildings, lighting instrument, windpipes, oil pipelines, for instance.
We are one of the largest manufactuers aluminium profile in China, We were found on 2005, and have more than 3000 desgins in hand , exported over more than 30 countries..
Our Service for all client are :
Service Time : 7*24 hours total 365 days. (You can call or email us anytime, And we will reply you within 1 or 2 hours.
Quality: Approval SGS, BV test
FAQ For Saving Your Precious Time!
Q1: What's the thickness for anodizing?Can you do 15um?
A: Our normal thickness is about 10 um.Yes, we can do 15um and above.
Q2: What color you can do for powder coating?The thickness for powder coat?
A: We can do any color for powder coat as long as you can provide the color sample.Our normally powder coating thickness is 60-80um.
Q3: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc.If you need any other colors, we can do according to the color samples you provide.
Q4: How's the weather resistance for wood grain finish D1010?
A:(1). Powder:Akzo Noble Interpon D1010.
(2). Wood grain film:Italian Menphis.
(3). Standard complied:American AAMA Standard.2603
(4). UV test:1000 hours.
(5). Salt spraying test:1000 hours.
(6). Normal weather:10 years color guarantee.
Q5: What certification do you have?What's your standard?
A: We have ISO certification.Our standard is DIN, AAMA, AS/NZS, China GB.
Q6: What's the delivery time for samples and mass production?
A:(1). 2-3 weeks to make the new moulds and make free samples.
(2). 3-4 weeks after receipt of deposit and confirmation of the order.
Contact Person: Chris Gong